Quick Answer: Daylight saving time water softener clocks usually don't adjust on their own, so they run an hour off after each change. That's usually harmless: a 2 a.m. regeneration just runs at 1 a.m. or 3 a.m. house time. Reset it if regeneration is set close to when people get up, or if you want the display right. It takes under a minute on most models.
The daylight saving time water softener reset is easy to miss when the unit sits in the basement, so it often runs an hour off for months. Here is whether that matters and how to fix it.
In this guide
2026–2027 clock change dates for softener owners

In most of the US, daylight saving time starts on the second Sunday in March and ends on the first Sunday in November, at 2 a.m. local time:
- Sunday, November 1, 2026: clocks fall back one hour.
- Sunday, March 14, 2027: clocks spring forward one hour.
Hawaii and most of Arizona don't observe daylight saving time, so softeners there need no seasonal change.
Will your softener adjust itself?

Probably not. The manuals for Pentair's Fleck 5600SXT, Clack's WS1 and Whirlpool's WHES40/44 all describe setting the time by hand and don't mention automatic daylight saving adjustment. Standalone controls keep their own clock and have no way to know the date rules.
Some Wi-Fi or Bluetooth models sync time from your phone or the internet. If yours has an app, check whether it handles the switch, or just look at the display the day after the change.
When an hour off matters, and when it doesn't

It doesn't matter if regeneration is set to 2 or 3 a.m. and nobody's up between 1 and 4 a.m., or you have a twin-tank softener that supplies soft water during regeneration.
It does matter if:
- Someone showers at 4:30 or 5 a.m. and your regen time is close to that.
- Someone works nights and runs water in the early hours.
- A dishwasher or washer runs on a delayed start in the early morning.
- You're on a well and an irrigation load would overlap with backwash.
During regeneration, most single-tank softeners send untreated water to the house. Pentair's 5600SXT manual says it outright: during the recharge cycle, untreated water bypasses into the building. Hot water used then sends hard water into the water heater. Our guide to what time a softener should regenerate helps you pick a time with a buffer on both sides.
Resetting the clock on Fleck, Clack and Whirlpool controls

Steps come from each manufacturer's manual; check yours if the display looks different.
Fleck 5600SXT
- Press and hold Up or Down until the programming icon replaces the service icon.
- Adjust the time with Up and Down, checking AM/PM.
- Press Extra Cycle to return to normal operation.
Don't leave it at exactly 12:01 PM: on the 5600SXT, that's the first step into the master programming menu. Our guide to programming the Fleck 5600SXT covers the other settings.
Clack WS1
- Press CLOCK.
- Set the hour with ▲ or ▼. AM/PM toggles after 12.
- Press NEXT, set the minutes, then press NEXT to exit.
A flashing time usually means a low backup battery; Clack calls for a 3-volt lithium 2032 coin cell. See our Clack WS1 programming guide.
Whirlpool WHES40 and WHES44
- Press PROGRAM until CURRENT TIME shows.
- Use UP or DOWN to set the time. Hold the button to move faster.
- Confirm AM or PM.
Other Whirlpool models differ; our Whirlpool programming guide covers more.
Mechanical dials and other brands
Mechanical timers, like older dial-style Fleck heads, have a 24-hour gear you push in and rotate until the current time lines up with the pointer.
A daylight saving time water softener checkup
The clock change is a good reminder to check:
- Salt: above the water line, with no crust or bridge.
- Hardness setting: retest if your city changed sources or it's been a while.
- Regeneration time: confirm nothing changed.
- Backup battery: if the clock loses time after every short outage, the battery is weak or the board is failing. If the board has no replaceable cell, a new head or system may be the fix; see our best Fleck water softeners and best on-demand softeners.
FAQ
Do water softeners automatically change for daylight saving time?
Most don't. Standalone controls such as the Fleck 5600SXT, Clack WS1 and Whirlpool WHES series are set by hand. Some app-connected models sync time automatically.
What happens if I don't change my water softener clock?
Regeneration runs an hour early after fall back and an hour late after spring forward. That's harmless unless it overlaps with early-morning water use.
What time should a water softener regenerate?
2 a.m. is the usual choice, because nobody is using water. Leave at least an hour of buffer before the first person gets up.
Why does my water softener clock keep losing time?
A weak backup battery or a failing control board. On a Clack WS1, replace the 2032 coin cell first.
Pick a regen time an hour can't hurt
Most daylight saving time water softener problems are an hour of drift, not a fault. Reset the clock in under a minute, or set regeneration far enough from your earliest shower that a one-hour shift never reaches it.
